How polishing works
Polishing is a mechanical process. We grind the surface with progressively finer diamonds, apply a densifier that hardens the concrete, and keep refining until the floor reaches the sheen you want, from a soft satin to a higher gloss. Because the shine is in the concrete itself and not in a film on top, there is nothing to peel.
Where it makes sense
Polished concrete is a strong choice for modern interiors, open-plan homes, retail stores, offices and warehouses that want a clean, durable floor with low upkeep. It works best on slabs in reasonable condition. During the free inspection we check for old coatings, cracks and moisture and tell you honestly whether polishing or a coating system is the better fit.
Repairs and preparation
Cracks, joints and spalls are repaired before polishing so they do not become weak spots later. Old adhesives, paint and sealers come off first. This prep work is where most of our time goes on any floor, and it is the reason we can stand behind the result in writing.
Pricing
Polished concrete starts around $5.75 per square foot. The slab decides the final number: heavy repairs, old coatings or a very uneven surface add time. Every quote is written after an on-site visit and lists the scope, the finish level and the schedule.
Care and maintenance
Dust-mop regularly and clean with a neutral cleaner. Avoid acidic products, which can etch the surface. Polished concrete does not need waxing, and it keeps its look for years with basic cleaning.
Polished concrete or a coating?
If you want color, flake or a metallic effect, a coating system is the answer. If you want the natural look of concrete with very low maintenance, polishing usually wins. We explain the trade-offs during the free estimate and put both options in writing when either could work.
FAQ
Is polished concrete slippery?
A polished floor is not as slick as a high-gloss coating when dry, but any smooth floor gets slicker when wet. For wet areas we recommend a textured system instead.
Can you polish a floor that had carpet or tile?
Often yes. Once the old adhesive is ground off, we inspect the slab and tell you what finish it can realistically reach.